Reliance™ StormMax®

Introduction

The Reliance™ StormMax® curtain wall system was designed to accommodate 1-5/16" insulating laminated glazing. This system features a shear block assembly which allows maximum flexibility in installation.

  • 2-1/2" sight lines 7-1/2" depth
  • Exterior Glazed Front Set
  • 1-5/16" Insulating Laminated Glazing
  • Shear Block Assembly
  • Dry or Wet Glazed Options
  • Thermally Broken
  • Zone Glazed
  • 9/16" Spandrel Option (Wet Glazed only)
  • Factory finishes Kynar 500 Hylar 500
  • Finishes meeting all provisions of AAMA 605.2-94 and AAMA 2805-98
  • Factory anodized finishing
  • Can incorporate MSD-75Entrances
  • Air Infiltration – Passed at 6.24 PSF per TAS-202 and ASTM E 283
  • Static Water – 15 PSF per TAS-202 and ASTM E 331
  • Structural Load – Tested up to +100 / -100 PSF per TAS-202 and ASTM E 330
  • Large & Small Missile Impact and Cycling - Tested up to +100 / -100 PSF per TAS-201, 203 and ASTM E 1886
  • Miami / Dade County
  • Florida Building Code TAS-201, TAS-202, TAS-203
  • ASTM E 1886, E 1996
    CAD DetailsClick to expand [+] / collapse [–]. Click link on right to download file.

    Single Span / Twin Span dwg_reliance-strmax.zip reliance-strmax.pdf

    • Elevation Single Span (DWG)
      Elevated Dry Glaze (DWG)
      Elevated Wet Dry Glaze Single Span (DWG)
      Elevated Wet Dry Glaze Twin Span (DWG)
      Head at Vision - H9601 (DWG)
      Typical Horizontal - H9602 (DWG)
      Sill at Vison - H9603 (DWG)
      Roll Over Horizontal - H9604 (DWG)
      Roll Under Horizontal - H9605 (DWG)
      Head at Spandrel - H9606 (DWG)
      Typical Horizontal - H9607 (DWG)
      Roll Over Horizontal - H9608 (DWG)
      Roll Under Horizontal - H9609 (DWG)
      Sill at Spandrel - H9610 (DWG)
      Door Head-OHSC - H9616 (DWG)
      Door Head-OHCC - H9617 (DWG)
      Jamb Anchor at Head - H9621 (DWG)
      Jamb Anchor at Sill - H9622 (DWG)
      Mull Anchor at Head - H9623 (DWG)
      Mull Anchor at Sill - H9624 (DWG)
      Jamb Anchor at Head - H9625 (DWG)
      Jamb Anchor at Sill - H9626 (DWG)
      Mull Anchor at Head - H9627 (DWG)
      Mull Anchor at Sill - H9628 (DWG)
      Jamb Anchor at Head - H9629 (DWG)
      Jamb Anchor at Sill - H9630 (DWG)
      Mull Anchor at Head - H9631 (DWG)
      Jamb Anchor at Sill - H9632 (DWG)
      Jamb Anchor at Head - H9633 (DWG)
      Jamb Anchor at Sill - H9634 (DWG)
      Mull Anchor at Head - H9635 (DWG)
      Jamb Anchor at Sill - H9636 (DWG)
      Jamb Anchor at Sill - H9638 (DWG)
      Typical Expansion Horizontal - H9641 (DWG)
      Expansion Horizontal at Corner - H9642 (DWG)
      Twin Span Splice - H9643 (DWG)
      Horizontal View at Steel Anchor - H9644 (DWG)
      Head at Vision - H9651 (DWG)
      Typical Horizontal - H9652 (DWG)
      Sill at Vison - H9653 (DWG)
      Jamb - V9601 (DWG)
      Vertical Mullion - V9602 (DWG)
      Jamb - V9603 (DWG)
      Vertical Mullion - V9604 (DWG)
      Jamb - V9605 (DWG)
      Vertical Mullion - V9606 (DWG)
      SSG Vertical - V9609 (DWG)
      Jamb - V9610 (DWG)
      SSG Mullion - V9611 (DWG)
      Door Jamb - V9616 (DWG)
      Standard Mullion - V9621 (DWG)
      Heavy Mullion - V9622 (DWG)
      90 Degree OSC - V9623 (DWG)
      SSG Vertical at Twin Span - V9624 (DWG)
      90 Degree SSG OSC - V9625 (DWG)
      Steel Anchor at Jamb - V9631 (DWG)
      Steel Anchor at Typ. Vertical - V9632 (DWG)
      Steel Anchor at Hvy Vertical - V9633 (DWG)
      Steel Anchor at 90 Corner - V9634 (DWG)
      Standard Vertical Splice V9641 (DWG)
      SSG Vertical Splice V9642 (DWG)
      Heavy Vertical Splice - V9643 (DWG)
      Steel Anchor at Typ. Vertical - V9644 (DWG)
      Jamb - V9651 (DWG)
      Vertical Mullion - V9652 (DWG)
    Specifications

    Reliance™ StormMax® Specifications spec_Reliance-StrMax_rev.doc

    Literature

    • Reliance™ StormMax® Installation Manual(PDF)
    • Reliance™ StormMax® NOA (LMI)(PDF)
    • Reliance™ StormMax® NOA (SMI)(PDF)
    • Reliance™ StormMax® NOA (SSG)(PDF)
    • Reliance™ StormMax® Sell Sheet(PDF)